24

Note: Design Kit Contents are subject to change without notice.

G-06-G

DESIGN ENGINEERING KITS

RADIAL LEADED MONOLITHIC CERAMIC CHIP CAPACITORS

(25 to 630 VDC)

RPE 100 VDC and less for Commercial and Automotive applications

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

Small dimensions, large capacitance, and a capacity volume ratio of 10 F/cm cube, close to that of electrolytic capacitors. These do not

have polarity.

I

Excellent frequency characteristics and due to these small internal inductance are suitable for high frequency.

I

Epoxy coated type which are not highly flammable, having characteristics equivalent to the UL94V-0 standard.

I

No polarity

I

Stringent dimensional tolerances allow highly reliable, high speed automatic chip placement on PCBs.

RDE 25, 50, 100, 250 and 630 VDC for Commercial applications only

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

Small size and large capacitance

I

Low ESR characteristics for high frequency

I

Epoxy coated type which are not highly flammable, having characteristics equivalent to the UL94V-0 standard.

I

No polarity

I

Application only for consumer electronics equipment.

MEDIUM VOLTAGE MONOLITHIC CERAMIC CHIP CAPACITORS

(250 to 3.15 KV)

U2J, 250V, 630V, 1KV, 2KV, 3.15KV

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

Murata’s original internal electrode structure realizes high flash-over voltage.

I

A new monolithic structure for small, surface-mountable devices capable of operating at high voltage levels.

I

Sn-plated external electrodes realize good solderability.

I

Use the GRM21/31 type with flow or reflow soldering, and other types with reflow soldering only.

I

Low-loss and suitable for high frequency circuits

I

Working VDC: 250V, 630V, 1kV, 2kV, 3.15kV

X7R, 250V, 630V

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

A new monolithic structure for small, high capacitance capable of operating at high voltage levels.

I

Sn-plated external electrodes realizes good solderability.

I

Use the GRM18/21/31 types with flow or reflow soldering, and other types with reflow soldering only.

I

Working VDC: 250V, 630V

GR4, X7R, 2KV

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

These items are designed specifically for telecommunication devices (IEEE802.3) in Ethernet LAN.

I

A new monolithic structure for small, high capacitance components capable of operating at high voltage levels.

I

Sn-plated external electrodes realizes good solderability.

I

Only for reflow soldering

I

The low-profile type (thickness: 1.5mm max.) is available. Fit for use on thinner type equipment.

I

Working Voltage: 2000V

RADIAL LEADED MEDIUM VOLTAGE DISC CAPACITORS

(500 to 6.3 KV)

DES, DEA, DEB, DEH and DEC Series

For availability check with your Murata Sales Contact. Part numbers in kits depend on application.

I

Operating temperature range is guaranteed up to 125 degree C.

I

Coated with flame-retardant epoxy resin (equivalent to UL94V-0 standard).

I

Taping available for automatic insertion.

I

Available product for RoHS Restriction (EU Directive 2002/95/EC).

I

Working Voltages: DES series: 500 & 1KVDC; DEA, DEB, and DEH series: 1KV, 2KV, 3.15KV; DEC Series: 6.3 KVDC