PRF18BE471RB5RB datasheet(95/104 Pages) MURATA

95 / 104 page

!Caution/Notice

(3) Standard Temperature Profile for Soldering

(a) Insufficient preheating may cause a crack on

ceramic body. Difference between preheating

temperature and maximum temperature in the profile

should be 100°C.

(b) Rapid cooling by dipping in solvent or by other

means is not recommended.

Soldering

Gradual cooling

(in air)

Preheating (in air)

1 to 2 min.

200

100

250°C

Reflow Soldering Conditions

* In case of repeated soldering, the accumulated soldering

time should be within the range shown above figure (2).

*20 sec.

Preheating: 150±10°C, 1 to 2 minutes

Soldering: 250°C, 20 seconds

(4) There may be a risk of unexpected failures

(tombstone, insufficient solder-wetting, etc.) in the

mounting process, caused by the mounting conditions.

Please make sure that this product is correctly

mounted under specified mounting conditions.

(2) Allowable Soldering Temperature and Time

(a) Solder within the temperature and time

combinations, indicated by the slanted lines in the

graphs at right.

(b) The excessive soldering conditions may cause

dissolution of metallization or deterioration of

solder-wetting on the external electrode.

soldering time should be within the range shown

below figure. ( For example, Reflow peak temperature:

260°C, twice –> The accumulated soldering time at

260°C is within 30 sec. )

Continued from the preceding page.

Allowable Reflow Soldering Temp. and Time

280

270

260

250

240

230

220

210

110

20 30 40 50 60 70

100

Time (sec.)

R90E.pdf

Sep.24,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁcations. Therefore, please approve our product speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

PRF18BE471RB5RB датащи(PDF) 95 Page - Murata Manufacturing Co., Ltd.

PRF18BE471RB5RB датащи(HTML) 95 Page - Murata Manufacturing Co., Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL