LPC4350_13 datasheet(74/153 Pages) NXP

74 / 153 page

LPC4350_30_20_10

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 4 — 26 March 2013

74 of 153

NXP Semiconductors

LPC4350/30/20/10

32-bit ARM Cortex-M4/M0 microcontroller

• Supports all high-speed USB-compliant peripherals if connected to external ULPI

PHY.

• Supports all full-speed USB-compliant peripherals.

• Supports interrupts.

• This module has its own, integrated DMA engine.

• USB interface electrical test software included in ROM USB stack.

7.17.7 LCD controller

Remark: The LCD controller is available on LPC4350 only. See Table 2.

The LCD controller provides all of the necessary control signals to interface directly to

various color and monochrome LCD panels. Both STN (single and dual panel) and TFT

panels can be operated. The display resolution is selectable and can be up to 1024

 768

pixels. Several color modes are provided, up to a 24-bit true-color non-palettized mode.

An on-chip 512 byte color palette allows reducing bus utilization (that is, memory size of

the displayed data) while still supporting many colors.

The LCD interface includes its own DMA controller to allow it to operate independently of

the CPU and other system functions. A built-in FIFO acts as a buffer for display data,

providing flexibility for system timing. Hardware cursor support can further reduce the

amount of CPU time required to operate the display.

7.17.7.1

Features

• AHB master interface to access frame buffer.

• Setup and control via a separate AHB slave interface.

• Dual 16-deep programmable 64-bit wide FIFOs for buffering incoming display data.

• Supports single and dual-panel monochrome Super Twisted Nematic (STN) displays

with 4-bit or 8-bit interfaces.

• Supports single and dual-panel color STN displays.

• Supports Thin Film Transistor (TFT) color displays.

• Programmable display resolution including, but not limited to: 320  200, 320  240,

640

 200, 640  240, 640  480, 800  600, and 1024  768.

• Hardware cursor support for single-panel displays.

• 15 gray-level monochrome, 3375 color STN, and 32 K color palettized TFT support.

• 1, 2, or 4 bits-per-pixel (bpp) palettized displays for monochrome STN.

• 1, 2, 4, or 8 bpp palettized color displays for color STN and TFT.

• 16 bpp true-color non-palettized for color STN and TFT.

• 24 bpp true-color non-palettized for color TFT.

• Programmable timing for different display panels.

• 256 entry, 16-bit palette RAM, arranged as a 128  32-bit RAM.

• Frame, line, and pixel clock signals.

• AC bias signal for STN, data enable signal for TFT panels.

• Supports little and big-endian, and Windows CE data formats.

LPC4350 датащи(PDF) 74 Page - NXP Semiconductors

LPC4350 датащи(HTML) 74 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL