<TRANSISTOR ARRAY>

8-UNIT 500mA DARLINGTON TRANSISTOR ARRAY WITH CLAMP DIODE

SOURCE TYPE

M63840KP

6

2012.May

© 2012 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.

Keep safety first in your circuit designs!

Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more

reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors

may lead to personal injury, fire or property damage. Remember to give due consideration to safety when

making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary

circuits, (ii) use of non-flammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

•These materials are intended as a reference to assist our customers in the selection of the Mitsubishi

semiconductor product best suited to the customer’s application; they do not convey any license under

any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third

party.

•Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-

party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or

circuit application examples contained in these materials.

•All information contained in these materials, including product data, diagrams, charts, programs and

algorithms represents information on products at the time of publication of these materials, and are

subject to change by Mitsubishi Electric Corporation without notice due to product improvements or

other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an

authorized Mitsubishi Semiconductor product distributor for the latest product information before

purchasing a product listed herein.

The information described here may contain technical inaccuracies or typographical errors. Mitsubishi

Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these

inaccuracies or errors.

Please also pay attention to information published by Mitsubishi Electric Corporation by various means,

including the Mitsubishi Semiconductor home page (http://www.MitsubishiElectric.com/).

•When using any or all of the information contained in these materials, including product data, diagrams,

charts, programs, and algorithms, please be sure to evaluate all information as a total system before

making a final decision on the applicability of the information and products. Mitsubishi Electric

Corporation assumes no responsibility for any damage, liability or other loss resulting from the

information contained herein.

•Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or

system that is used under circumstances in which human life is potentially at stake. Please contact

Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when

considering the use of a product contained herein for any specific purposes, such as apparatus or

systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

•The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in

whole or in part these materials.

•If these products or technologies are subject to the Japanese export control restrictions, they must be

exported under a license from the Japanese government and cannot be imported into a country other

than the approved destination.

Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the

country of destination is prohibited.

•Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product

distributor for further details on these materials or the products contained therein.