L6360 datasheet(40/65 Pages) STMICROELECTRONICS

номер детали	L6360

подробное описание детали	IO-Link communication master transceiver IC

PDF	65 Pages

Scroll/Zoom	100%

производитель	STMICROELECTRONICS [STMicroelectronics]

домашняя страница	http://www.st.com

Logo

40 / 65 page

Device configuration

L6360

40/65

Doc ID 022817 Rev 2

6.4

I2C protocol

6.4.1

Protocol configuration

Figure 24.

Device initialization

Microcontroller initialization: Microcontroller initialization phase.

Write mode: The L6360 is configured by the microcontroller through I2C.

To configure the device, it is necessary to write its internal registers (see Write modes

section).

Parity check: L6360 calculates the parity of each received register and stores it in the parity

If the parity check of one or more registers failed, the “parity error bit” in the status register is

set and an interrupt is generated by the L6360.

The microcontroller can now read the status register and the parity register (current read).

So the microcontroller can understand the interrupt cause and which register failed the

transmission. If the parity check is ok, the flow goes on (Read modes).

Write register failed: The microcontroller can again write the register(s) that failed the

check.

Read mode: Read status register to monitor if the configuration was good (Read modes).

L6360 датащи(PDF) 40 Page - STMicroelectronics