| поискавой системы для электроныых деталей |
|
SST48CF008 датащи(PDF) 12 Page - Silicon Storage Technology, Inc |
|
|
|||||||||||||||||||||||||||||
SST48CF008 датащи(HTML) 12 Page - Silicon Storage Technology, Inc |
|
12 / 60 page ![]() 12 Data Sheet CompactFlash Card SST48CF008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 / 256 ©2001 Silicon Storage Technology, Inc. S71125-03-000 9/01 375 -VS1 -VS2 (PC Card Memory Mode) O33 40 Voltage Sense Signals. -VS1 is grounded so that the CompactFlash card CIS can be read at 3.3V and -VS2 is reserved by PCMCIA for a secondary voltage. -VS1 -VS2 (PC Card I/O Mode) This signal is the same for all modes. -VS1 -VS2 (True IDE Mode) This signal is the same for all modes. -WAIT (PC Card Memory Mode) O 42 The -WAIT signal is driven low by the CompactFlash Card to signal the host to delay completion of a memory or I/O cycle that is in progress. -WAIT (PC Card I/O Mode) This signal is the same as the PC Card Memory Mode signal. IORDY (True IDE Mode) In True IDE Mode this output signal may be used as IORDY. -WE (PC Card Memory Mode) I 36 This is a signal driven by the host and used for strobing memory write data to the registers of the CompactFlash card when the card is configured in the memory interface mode. It is also used for writing the configuration registers. -WE (PC Card I/O Mode) In PC Card I/O Mode, this signal is used for writing the configuration registers. -WE (True IDE Mode) In True IDE Mode this input signal is not used and should be con- nected to VDD by the host. WP (PC Card Memory Mode) Write Protect O 24 Memory Mode - The CompactFlash card does not have a write protect switch. This signal is held low after the completion of the reset initialization sequence. -IOIS16 (PC Card I/O Mode) I/O Operation - When the CompactFlash card is configured for I/O Operation Pin 24 is used for the -I/O Selected is 16 Bit Port (-IOIS16) function. A Low signal indicates that a 16 bit or Odd Byte only opera- tion can be performed at the addressed port. -IOIS16 (True IDE Mode) In True IDE Mode this output signal is asserted low when this device is expecting a word data transfer cycle. T2-2.0 375 1. I = Input 0 = Output TABLE 2-2: SIGNAL DESCRIPTION (CONTINUED) (4 OF 4) Symbol Type1 Pin Name and Functions |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |