HT46R006 datasheet(19/72 Pages) HOLTEK

19 / 72 page

HT48R006/HT46R006

Rev. 1.00

October 24, 2011

Program Counter Low Register

- PCL

To provide additional program control functions, the low

byte of the Program Counter is made accessible to pro-

grammers by locating it within the Special Purpose area

of the Data Memory. By manipulating this register, direct

jumps to other program locations are easily imple-

mented. Loading a value directly into this PCL register

will cause a jump to the specified Program Memory lo-

cation, however, as the register is only 8-bit wide, only

jumps within the current Program Memory page are per-

mitted. When such operations are used, note that a

dummy cycle will be inserted.

Status Register

- STATUS

This 8-bit register contains the zero flag (Z), carry flag

(C), auxiliary carry flag (AC), overflow flag (OV), power

down flag (PDF), and watchdog time-out flag (TO).

These arithmetic/logical operation and system manage-

ment flags are used to record the status and operation of

the microcontroller.

With the exception of the TO and PDF flags, bits in the

status register can be altered by instructions like most

other registers. Any data written into the status register

will not change the TO or PDF flag. In addition, opera-

tions related to the status register may give different re-

sults due to the different instruction operations. The TO

flag can be affected only by a system power-up, a WDT

time-out or by executing the

²CLR WDT² or ²HALT² in-

struction. The PDF flag is affected only by executing the

²HALT² or ²CLR WDT² instruction or during a system

power-up.

The Z, OV, AC and C flags generally reflect the status of

the latest operations.

In addition, on entering an interrupt sequence or execut-

ing a subroutine call, the status register will not be

pushed onto the stack automatically. If the contents of

the status registers are important and if the interrupt rou-

tine can change the status register, precautions must be

taken to correctly save it. Note that bits 0~3 of the

STATUS register are both readable and writeable bits.

· STATUS Register

Bit

76543210

Name

¾¾

PDF

R/W

¾¾

R/W

POR

¾¾

xxxx

²x² unknown

Bit 7, 6

Unimplemented, read as

²0²

Bit 5

TO: Watchdog Time-Out flag

0: After power up or executing the

²CLR WDT² or ²HALT² instruction

1: A watchdog time-out occurred.

Bit 4

PDF: Power down flag

0: After power up or executing the

²CLR WDT² instruction

1: By executing the

²HALT² instruction

Bit 3

OV: Overflow flag

0: no overflow

1: an operation results in a carry into the highest-order bit but not a carry out of the

highest-order bit or vice versa.

Bit 2

Z: Zero flag

0: The result of an arithmetic or logical operation is not zero

1: The result of an arithmetic or logical operation is zero

Bit 1

AC: Auxiliary flag

0: no auxiliary carry

1: an operation results in a carry out of the low nibbles in addition, or no borrow from the

high nibble into the low nibble in subtraction

Bit 0

C: Carry flag

0: no carry-out

1: an operation results in a carry during an addition operation or if a borrow does not take place

during a subtraction operation

C is also affected by a rotate through carry instruction.

HT46R006 датащи(PDF) 19 Page - Holtek Semiconductor Inc

HT46R006 датащи(HTML) 19 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

датащи скачать

ссылки URL