SPEC No.

LCY-12T09303B

MODEL No.

LS013B4DN02

PAGE

3

Humidity

Humidity in work area relates to surface resistance of the persons or objects that generate

electrostatics, and it can be manipulated to prevent electrostatic charge. Humidity of 40% or

lower increases electrostatic earth resistance and promotes electrostatic charging. Therefore,

the humidity in the work area should be kept above 40%. Specifically for film peeling process

or processes that require human hands, humidity should be kept above 50% and use electricity

removal blower.

Transportation/Storage

Containers and styroform used in transporation and storage may charge electrostatic (from friction and

peeling) or electrostatic charge from human body, etc. may cause containers and styroform to have induced

charge. Proper electrostatic measure should be taken for containers and storage material.

(12) Protective film is attached to the surface of UV protection film on LCD panel to prevent scratches or other

damages. Remove this protective film before use.