70592C datasheet(247/314 Pages) MICROCHIP

247 / 314 page

DS70592C-page 247

PIC24HJXXXGPX06A/X08A/X10A

TABLE 24-9:

DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS

DC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V

(unless otherwise stated)

Operating temperature

-40°C

≤TA ≤+85°C for Industrial

-40°C

≤TA ≤+125°C for Extended

Param

No.

Symbol

Characteristic

Min

Typ(1)

Max

Units

Conditions

VIL

Input Low Voltage

DI10

I/O pins

VSS

—0.2 VDD

DI15

MCLR

VSS

—0.2 VDD

DI16

I/O Pins with OSC1 or SOSCI

VSS

—0.2 VDD

DI18

I/O Pins with I2CVSS

—

0.3 VDD

SMbus disabled

DI19

I/O Pins with I2C

VSS

—

0.8 V

SMbus enabled

VIH

Input High Voltage

DI20

I/O Pins Not 5V Tolerant(4)

I/O Pins 5V Tolerant(4)

0.7 VDD

—

VDD

5.5

DI28

SDAx, SCLx

0.7 VDD

—

5.5

SMbus disabled

DI29

SDAx, SCLx

2.1

—

5.5

SMbus enabled

ICNPU

CNx Pull-up Current

DI30

250

400

μAVDD = 3.3V, VPIN = VSS

IIL

Input Leakage Current(2,3)

DI50

I/O Pins 5V Tolerant(4)

——

±2

μAVSS ≤ VPIN ≤ VDD,

Pin at high-impedance

DI51

I/O Pins Not 5V Tolerant(4)

——

±1

μAVSS ≤ VPIN ≤ VDD,

Pin at high-impedance,

-40°C

≤TA ≤+85°C

DI51a

I/O Pins Not 5V Tolerant(4)

——

±2

μA

Shared with external reference

pins, -40°C

≤TA ≤+85°C

DI51b

I/O Pins Not 5V Tolerant(4)

——

±3.5

μAVSS ≤ VPIN ≤ VDD, Pin at

high-impedance,

-40°C

≤TA ≤+125°C

DI51c

I/O Pins Not 5V Tolerant(4)

——

±8

μA

Analog pins shared with

external reference pins,

-40°C

≤TA ≤+125°C

DI55

MCLR

——

±2

μAVSS ≤ VPIN ≤ VDD

DI56

OSC1

—

±2

μAVSS ≤ VPIN ≤ VDD,

XT and HS modes

Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltages.

3: Negative current is defined as current sourced by the pin.

4: See “Pin Diagrams” for a list of 5V tolerant pins.

5: VIL source < (VSS – 0.3). Characterized but not tested.

6: Non-5V tolerant pins VIH source > (VDD + 0.3), 5V tolerant pins VIH source > 5.5V. Characterized but not

tested.

7: Digital 5V tolerant pins cannot tolerate any “positive” input injection current from input sources > 5.5V.

8: Injection currents > | 0 | can affect the ADC results by approximately 4-6 counts.

9: Any number and/or combination of I/O pins not excluded under IICL or IICH conditions are permitted pro-

vided the mathematical “absolute instantaneous” sum of the input injection currents from all pins do not

exceed the specified limit. Characterized but not tested.

70592C датащи(PDF) 247 Page - Microchip Technology

70592C датащи(HTML) 247 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL