DP35DP datasheet(51/84 Pages) INTEL

номер детали	DP35DP

подробное описание детали	Technical Product Specification

PDF	84 Pages

Scroll/Zoom	100%

производитель	INTEL [Intel Corporation]

домашняя страница	http://www.intel.com

Logo

51 / 84 page

Technical Reference

2.3

Jumper Block

CAUTION

Do not move the jumper with the power on. Always turn off the power and unplug the

power cord from the computer before changing a jumper setting. Otherwise, the

board could be damaged.

Figure 14 shows the location of the jumper block. The jumper determines the BIOS

Setup program’s mode. Table 24 lists the jumper settings for the three modes:

normal, configure, and recovery. When the jumper is set to configure mode and the

computer is powered-up, the BIOS compares the processor version and the microcode

version in the BIOS and reports if the two match.

Figure 14. Location of the Jumper Block

Table 24. BIOS Setup Configuration Jumper Settings

Function/Mode Jumper Setting

Configuration

Normal

1-2

32 1

The BIOS uses current configuration information and

passwords for booting.

Configure

2-3

32 1

After the POST runs, Setup runs automatically. The

maintenance menu is displayed.

Recovery

None

32 1

The BIOS attempts to recover the BIOS configuration. See

Section 3.7 for more information on BIOS recovery.

DP35DP датащи(PDF) 51 Page - Intel Corporation