DP35DP datasheet(17/84 Pages) INTEL

17 / 84 page

Product Description

1.5.1

Memory Configurations

The Intel 82P35 MCH supports the following types of memory organization:

•

Dual channel (Interleaved) mode. This mode offers the highest throughput for

real world applications. Dual channel mode is enabled when the installed memory

capacities of both DIMM channels are equal. Technology and device width can vary

from one channel to the other but the installed memory capacity for each channel

must be equal. If different speed DIMMs are used between channels, the slowest

memory timing will be used.

•

Single channel (Asymmetric) mode. This mode is equivalent to single channel

bandwidth operation for real world applications. This mode is used when only a

single DIMM is installed or the memory capacities are unequal. Technology and

device width can vary from one channel to the other. If different speed DIMMs are

used between channels, the slowest memory timing will be used.

•

Flex mode. This mode provides the most flexible performance characteristics.

The bottommost DRAM memory (the memory that is lowest within the system

memory map) is mapped to dual channel operation; the topmost DRAM memory

(the memory that is nearest to the 8 GB address space limit), if any, is mapped to

single channel operation. Flex mode results in multiple zones of dual and single

channel operation across the whole of DRAM memory. To use flex mode, it is

necessary to populate both channels.

For information about…

Refer to:

Memory Configuration Examples

http://www.intel.com/support/motherboards/desktop/sb/cs-

011965.htm

DP35DP датащи(PDF) 17 Page - Intel Corporation