SC312XDP512F0MPVR datasheet(1173/1348 Pages) FREESCALE

1173 / 1348 page

Chapter 28 256 Kbyte Flash Module (S12XFTX256K2V1)

MC9S12XDP512 Data Sheet, Rev. 2.21

Freescale Semiconductor

1175

28.4.2.2.1

Data Compress Operation

The Flash module contains a 16-bit multiple-input signature register (MISR) for each Flash block to

generate a 16-bit signature based on selected Flash array data. If multiple Flash blocks are selected for

simultaneous compression, then the signature from each Flash block is further compressed to generate a

single 16-bit signature. The ﬁnal 16-bit signature, found in the FDATA registers after the data compress

operation has completed, is based on the following logic equation which is executed on every data

compression cycle during the operation:

MISR[15:0] = {MISR[14:0], ^MISR[15,4,2,1]} ^ DATA[15:0]

Eqn. 28-1

where MISR is the content of the internal signature register associated with each Flash block and DATA

is the data to be compressed as shown in Figure 28-27.

Figure 28-27. 16-Bit MISR Diagram

During the data compress operation, the following steps are executed:

1. MISR for each Flash block is reset to 0xFFFF.

2. Initialized DATA equal to 0xFFFF is compressed into the MISR for each selected Flash block

which results in the MISR containing 0x0001.

3. DATA equal to the selected Flash array data range is read and compressed into the MISR for each

selected Flash block with addresses incrementing.

4. DATA equal to the selected Flash array data range is read and compressed into the MISR for each

selected Flash block with addresses decrementing.

5. If Flash block 0 is selected for compression, DATA equal to the contents of the MISR for Flash

block 0 is compressed into the MISR for Flash block 0. If data in Flash block 0 was not selected

for compression, the MISR for Flash block 0 contains 0xFFFF.

6. If Flash block 1 is selected for compression, DATA equal to the contents of the MISR for Flash

block 1 is compressed into the MISR for Flash block 0.

7. If Flash block 2 is selected for compression, DATA equal to the contents of the MISR for Flash

block 2 is compressed into the MISR for Flash block 0.

8. If Flash block 3 is selected for compression, DATA equal to the contents of the MISR for Flash

block 3 is compressed into the MISR for Flash block 0.

9. If Flash block 4 is selected for compression, DATA equal to the contents of the MISR for Flash

block 4 is compressed into the MISR for Flash block 0.

= Exclusive-OR

DATA[0]

DATA[1]

DATA[2]

DATA[3]

DATA[4]

DATA[5]

DATA[15]

M15

...

MISR[15:0] = Q[15:0]

SC312XDP512F0MPVR датащи(PDF) 1173 Page - Freescale Semiconductor, Inc

SC312XDP512F0MPVR датащи(HTML) 1173 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL