SC312XDP512F0MPVR datasheet(779/1348 Pages) FREESCALE

779 / 1348 page

Chapter 20 S12X Debug (S12XDBGV3) Module

MC9S12XDP512 Data Sheet, Rev. 2.21

Freescale Semiconductor

781

20.4.5.4

Reading Data from Trace Buffer

The data stored in the Trace Buffer can be read using either the background debug module (BDM) module

or the S12XCPU provided the S12XDBG module is not armed, is conﬁgured for tracing (at least one

TSOURCE bit is set) and the system not secured. When the ARM bit is written to 1 the trace buffer is

locked to prevent reading. The trace buffer can only be unlocked for reading by a single aligned word write

to DBGTB when the module is disarmed. Multiple writes to the DBGTB are not allowed since they

increment the pointer.

The Trace Buffer can only be read through the DBGTB register using aligned word reads, any byte or

misaligned reads return 0 and do not cause the trace buffer pointer to increment to the next trace buffer

address. The Trace Buffer data is read out ﬁrst-in ﬁrst-out. By reading CNT in DBGCNT the number of

valid 64-bit lines can be determined. DBGCNT will not decrement as data is read.

Whilst reading an internal pointer is used to determine the next line to be read. After a tracing session, the

pointer points to the oldest data entry, thus if no overﬂow has occurred, the pointer points to line0,

otherwise it points to the line with the oldest entry. The pointer is initialized by each aligned write to

DBGTBH to point to the oldest data again. This enables an interrupted trace buffer read sequence to be

easily restarted from the oldest data entry.

CRW

Read Write Indicator — This bit indicates if the corresponding stored address corresponds to a read or write

access. This bit only contains valid information when tracing S12XCPU activity in Detail Mode.

0 Write Access

1 Read Access

COCF

S12XCPU Opcode Fetch Indicator — This bit indicates if the stored address corresponds to an opcode fetch

cycle. This bit only contains valid information when tracing the XGATE accesses in Detail Mode.

0 Stored information does not correspond to opcode fetch cycle

1 Stored information corresponds to opcode fetch cycle

XACK

XGATE Access Indicator — This bit indicates if the stored XGATE address corresponds to a free cycle. This bit

only contains valid information when tracing the S12XCPU accesses in Detail Mode.

0 Stored information corresponds to free cycle

1 Stored information does not correspond to free cycle

XSZ

Access Type Indicator — This bit indicates if the access was a byte or word size access. This bit only contains

valid information when tracing XGATE activity in Detail Mode.

0 Word Access

1 Byte Access

XRW

Read Write Indicator — This bit indicates if the corresponding stored address corresponds to a read or write

access. This bit only contains valid information when tracing XGATE activity in Detail Mode.

0 Write Access

1 Read Access

XOCF

XGATE Opcode Fetch Indicator — This bit indicates if the stored address corresponds to an opcode fetch

cycle.This bit only contains valid information when tracing the S12XCPU accesses in Detail Mode.

0 Stored information does not correspond to opcode fetch cycle

1 Stored information corresponds to opcode fetch cycle

Table 20-42. CXINF Field Descriptions (continued)

Field

Description

SC312XDP512F0MPVR датащи(PDF) 779 Page - Freescale Semiconductor, Inc

SC312XDP512F0MPVR датащи(HTML) 779 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL