SC312XDP512F0MPVR datasheet(717/1348 Pages) FREESCALE

717 / 1348 page

Chapter 19 S12X Debug (S12XDBGV2) Module

MC9S12XDP512 Data Sheet, Rev. 2.21

Freescale Semiconductor

719

19.4.3.4

Trigger On XGATE S/W Breakpoint Request

The XGATE S/W breakpoint request issues a forced breakpoint request to the CPU immediately

independent of DBG settings. If the debug module is armed triggers the state sequencer into the disarmed

state. Active tracing sessions are terminated immediately, thus if tracing has not yet begun using begin-

trigger, no trace information is stored. XGATE generated breakpoints are independent of the DBGBRK

bits. The XGSBPE bit in DBGC1 determines if the XGATE S/W breakpoint function is enabled. The BDM

bit in DBGC1 determines if the XGATE requested breakpoint causes the system to enter BDM mode or

initiate a software interrupt (SWI).

19.4.3.5

Immediate Trigger

At any time independent of comparator matches or external tag signals it is possible to initiate a tracing

session and/or breakpoint by writing to the TRIG bit in DBGC1. This triggers the state sequencer into the

ﬁnal state and issues a forced breakpoint request to both CPU and XGATE.

19.4.3.6

Trigger Priorities

In case of simultaneous triggers, the priority is resolved according to Table 19-38. The lower priority

trigger is suppressed. It is thus possible to miss a lower priority trigger if it occurs simultaneously with a

trigger of a higher priority. The trigger priorities described in Table 19-38 dictate that in the case of

simultaneous matches, the match on the lower channel number ([0,1,2,3) has priority. The SC[3:0]

encoding ensures that a match leading to ﬁnal state has priority over all other matches independent of

current state sequencer state. When conﬁgured for range modes a simultaneous match of comparators A

and C generates an active match0 while match2 is suppressed.

Table 19-38. Trigger Priorities

Priority

Source

Action

Highest

XGATE

Immediate forced breakpoint......(Tracing terminated immediately).

TRIG

Enter ﬁnal state

External TAGHI/TAGLO

Enter State0

Match0 (force or tag hit)

Trigger to next state as deﬁned by state control registers

Match1 (force or tag hit)

Trigger to next state as deﬁned by state control registers

Match2 (force or tag hit)

Trigger to next state as deﬁned by state control registers

Lowest

Match3 (force or tag hit)

Trigger to next state as deﬁned by state control registers

SC312XDP512F0MPVR датащи(PDF) 717 Page - Freescale Semiconductor, Inc

SC312XDP512F0MPVR датащи(HTML) 717 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL