ATmega128 datasheet(171/386 Pages) ATMEL

номер детали	ATmega128

подробное описание детали	8-bit Microcontroller with 128K Bytes In-System Programmable Flash

PDF	386 Pages

Scroll/Zoom	100%

производитель	ATMEL [ATMEL Corporation]

домашняя страница	http://www.atmel.com

Logo

171 / 386 page

171

2467S–AVR–07/09

ATmega128

USART

The Universal Synchronous and Asynchronous serial Receiver and Transmitter (USART) is a

highly flexible serial communication device. The main features are:

• Full Duplex Operation (Independent Serial Receive and Transmit Registers)

• Asynchronous or Synchronous Operation

• Master or Slave Clocked Synchronous Operation

• High Resolution Baud Rate Generator

• Supports Serial Frames with 5, 6, 7, 8, or 9 Data Bits and 1 or 2 Stop Bits

• Odd or Even Parity Generation and Parity Check Supported by Hardware

• Data OverRun Detection

• Framing Error Detection

• Noise Filtering Includes False Start Bit Detection and Digital Low Pass Filter

• Three Separate Interrupts on TX Complete, TX Data Register Empty, and RX Complete

• Multi-processor Communication Mode

• Double Speed Asynchronous Communication Mode

Dual USART

The ATmega128 has two USART’s, USART0 and USART1. The functionality for both USART’s

is described below. USART0 and USART1 have different I/O registers as shown in “Register

Summary” on page 362. Note that in ATmega103 compatibility mode, USART1 is not available,

neither is the UBRR0H or UCRS0C Registers. This means that in ATmega103 compatibility

mode, the ATmega128 supports asynchronous operation of USART0 only.

Overview

A simplified block diagram of the USART transmitter is shown in Figure 79. CPU accessible I/O

registers and I/O pins are shown in bold.

ATmega128 датащи(PDF) 171 Page - ATMEL Corporation