MCP73113 datasheet(13/34 Pages) MICROCHIP

13 / 34 page

DS22183B-page 13

MCP73113/4

3.0

PIN DESCRIPTION

The descriptions of the pins are listed in Table 3-1.

TABLE 3-1:

PIN FUNCTION TABLES

3.1

Battery Management Input Supply

(VDD)

A supply voltage of [VREG (Typical) + 0.3V] to 6.0V is

recommended. Bypass to VSS with a minimum of 1 µF.

The VDD pin is rated 18V absolute maximum to prevent

suddenly rise of input voltage from spikes or low cost

ac-dc wall adapter.

3.2

Battery Charge Control Output

(VBAT)

Connect to the positive terminal of the battery. Bypass

to VSS with a minimum of 1 µF to ensure loop stability

when the battery is disconnected.

3.3

No Connect (NC)

No connect.

3.4

Battery Management 0V Reference

(VSS)

Connect to the negative terminal of the battery and

input supply.

3.5

Status Output (STAT)

STAT is an open-drain logic output for connection to an

LED for charge status indication in standalone

applications. Alternatively, a pull-up resistor can be

applied for interfacing to a host microcontroller. Refer to

Table 5-1 for a summary of the status output during a

charge cycle.

3.6

Current Regulation Set (PROG)

The fast charge current is set by placing a resistor from

PROG to VSS during constant current (CC) mode.

PROG pin is rated up to 5V with 6V absolute maximum

value.

PROG pin also serves as charge control enable.

When a typical 200 k

Ω impedance is applied to PROG

pin, the MCP73113/4 device is disabled until the high

impedance

removed.

Refer

Section 5.5

“Constant Current MODE - Fast Charge” for details.

3.7

Exposed Pad (EP)

The Exposed Thermal Pad (EP) shall be connected to

the exposed copper area on the Printed Circuit Board

(PCB) for the thermal enhancement. Additional vias on

the copper area under the MCP73113/4 device can

improve the performance of heat dissipation and

simplify the assembly process.

MCP73113/4

Symbol

I/O

Function

DFN-10

1, 2

VDD

Battery Management Input Supply

3, 4

VBAT

I/O

Battery Charge Control Output

5, 6

No Connection

STAT

Battery Charge Status Output

8, 9

VSS

Battery Management 0V Reference

PROG

I/O

Battery Charge Current Regulation Program and Charge Control Enable

—

Exposed Pad

MCP73113 датащи(PDF) 13 Page - Microchip Technology

MCP73113 датащи(HTML) 13 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

датащи скачать

ссылки URL