•

North America Tel: 800.366.2266 / Fax: 978.366.2266

•

Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

•

Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

4

High Dynamic Range Low Noise Amplifier

400 - 500 MHz

Rev. V1

MAALSS0025

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Cross Section View

The PCB dielectric between RF traces and RF ground

layers should be chosen to reduce RF discontinuities

between 50-ohm lines and package pins.

M/A-COM

recommends an FR-4 dielectric thickness of 0.008” (0.20

mm) yielding a 50-ohm line width of 0.015” (0.38 mm).

The recommended RF metalization thickness is 1 ounce

copper.

SO-8

Recommended PCB Configuration