PCF8562TTSLASH2 datasheet(7/36 Pages) NXP

7 / 36 page

PCF8562_3

Product data sheet

Rev. 3 — 2 December 2008

7 of 36

NXP Semiconductors

PCF8562

Universal LCD driver for low multiplex rates

(1)

where VLCD is the resultant voltage at the LCD segment and where the values for n are

n = 1 for static mode

n = 2 for 1:2 multiplex

n = 3 for 1:3 multiplex

n = 4 for 1:4 multiplex

The RMS off-state voltage (Voff(RMS)) for the LCD is calculated with the equation:

(2)

Discrimination is the ratio of Von(RMS) to Voff(RMS) and is determined from the equation:

(3)

Using Equation 3, the discrimination for an LCD drive mode of 1:3 multiplex with

⁄2 bias is

and the discrimination for an LCD drive mode of 1:4 multiplex with

⁄

2 bias is

The advantage of these LCD drive modes is a reduction of the LCD full scale voltage VLCD

as follows:

• 1:3 multiplex (1

⁄

2 bias):

• 1:4 multiplex (1

⁄

2 bias):

These compare with

when 1

⁄

3 bias is used.

It should be noted that VLCD is sometimes referred as the LCD operating voltage.

on RMS

()

---

–

()

-------------





------------------------------------------------------------

LCD

off RMS

()

–

()

---------------------------------

LCD

on RMS

()

off RMS

()

------------------------

()

–

()

–

()

–

()

--------------------------------------------

1.732

----------

1.528

LCD

off RMS

()

2.449V

off RMS

(

)

LCD

()

----------------------

2.309V

off RMS

()

LCD

off RMS

()

PCF8562TT/2 датащи(PDF) 7 Page - NXP Semiconductors

PCF8562TT/2 датащи(HTML) 7 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

датащи скачать

ссылки URL