AD9522-1SLASHPCBZ datasheet(77/84 Pages) AD

77 / 84 page

AD9522-1

Rev. 0 | Page 77 of 84

Reg.

Addr

(Hex) Bit(s) Name

Description

198

[2]

Channel 2 power-down

Channel 2 powers down.

[2] = 0; normal operation (default).

[2] = 1; powered down. (OUT6/OUT6, OUT7/OUT7, and OUT8/OUT8 are put into the high

impedance power-down mode by setting this bit.)

198

[0]

Disable Divider 2 DCC

Duty-cycle correction function.

[0] = 0; enable duty-cycle correction (default).

[0] = 1; disable duty-cycle correction.

199

[7:4]

Divider 3 low cycles

Number of clock cycles (minus 1) of the divider input during which the divider output stays

low. A value of 0x0 means the divider is low for one input clock cycle (default: 0x0).

199

[3:0]

Divider 3 high cycles

Number of clock cycles (minus 1) of the divider input during which the divider output stays

high. A value of 0x0 means the divider is high for one input clock cycle (default: 0x0).

19A

[7]

Divider 3 bypass

Bypasses and powers down the divider; routes input to divider output.

[7] = 0; use divider (default).

[7] = 1; bypass divider.

19A

[6]

Divider 3 ignore SYNC

Ignore SYNC.

[6] = 0; obey chip-level SYNC signal (default).

[6] = 1; ignore chip-level SYNC signal.

19A

[5]

Divider 3 force high

Forces divider output to high. This requires that ignore SYNC also be set.

[5] = 0; divider output forced to low (default).

[5] = 1; divider output forced to high.

19A

[4]

Divider 3 start high

Selects clock output to start high or start low.

[4] = 0; start low (default).

[4] = 1; start high.

19A

[3:0]

Divider 3 phase offset

Phase offset (default: 0x0).

19B

[2]

Channel 3 power-down

Channel 3 powers down.

[2] = 0; normal operation (default).

[2] = 1; powered down. (OUT9/OUT9, OUT10/OUT10, and OUT11/OUT11 are put into the high

impedance power-down mode by setting this bit.)

19B

[0]

Disable Divider 3 DCC

Duty-cycle correction function.

[0] = 0; enable duty-cycle correction (default).

[0] = 1; disable duty-cycle correction.

Table 55. VCO Divider and CLK Input

Reg.

Addr

(Hex) Bit(s) Name

Description

1E0

[2:0]

VCO divider

[2]

[1]

[0]

Divide

2 (default)

Output static

1 (bypass)

Output static

1E1

[4]

Power-down clock input section

Powers down the clock input section (including CLK buffer, VCO divider, and CLK tree).

[4] = 0; normal operation (default).

[4] = 1; power down.

AD9522-1/PCBZ датащи(PDF) 77 Page - Analog Devices

AD9522-1/PCBZ датащи(HTML) 77 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84

датащи скачать

ссылки URL