7733 datasheet(276/940 Pages) RENESAS

276 / 940 page

A-D CONVERTER

7733 Group User’s Manual

9–11

9.3 A-D conversion method

The A-D converter compares the comparison voltage (Vref), which is internally generated according to the

contents of the successive approximation register, and the analog input voltage (VIN), which is input from

the analog input pin. By reflecting the comparison result on the successive approximation register, VIN is

converted into a digital value (successive approximation method). When a trigger occurs, the A-D converter

performs the following processing:

Determination of successive approximation register’s bit 9

The A-D converter compares Vref and VIN. At this time, contents of the successive approximation

Bit 9 of the successive approximation register changes according to the comparison result as follows:

If Vref < VIN, bit 9 = “1”

If Vref > VIN, bit 9 = “0”

Determination of successive approximation register’s bit 8

After setting bit 8 of the successive approximation register to “1,” the A-D converter compares Vref and

VIN. Bit 8 changes according to the comparison result as follows:

If Vref < VIN, bit 8 = “1”

If Vref > VIN, bit 8 = “0”

Determination of successive approximation register’s bits 7 to LSB

When resolution = 8 bits ........... For bits 7 to 2, perform operation .

When resolution = 10 bits ......... For bits 7 to 0, perform operation .

When the LSB is determined, the contents of the successive approximation register, in other words,

the conversion result is transferred to the A-D register i.

Vref is generated according to the latest contents of the successive approximation register. Table 9.3.1 lists

the relationship between the successive approximation register’s contents and Vref. Tables 9.3.2 and 9.3.3

list changes of the successive approximation register and Vref during A-D conversion. Figure 9.3.1 shows

theoretical A-D conversion characteristics when resolution = 10 bits.

Table 9.3.1 Relationship between successive approximation register’s contents and Vref

9.3 A-D conversion method

1 to 1023

× (n – 0.5)

VREFV: Reference voltage

VREFV

1024

Successive approximation register’s contents: n

Vref (V)

7733 датащи(PDF) 276 Page - Renesas Technology Corp