TUSB6015

SLLS937

REVISION 1.4 SEPTEMBER 12, 2008

TUSB6015 USB 2.0 High Speed Peripheral Controller Data Sheet

FEATURES

USB 2.0 High-Speed (HS) Compliant Peripheral

Controller Core

USB-IF TID # 40630005

Integrated USB 2.0 PHY

NOR FLASH - Like External Host Interface

DP/DM lines are high impedance when the device is

not powered

Six physical endpoints

Each endpoint is configurable as IN or OUT

with dedicated 1K buffer

NOR Flash Interface Access modes:

Asynchronous 16-bit single access

Asynchronous 32-bit single access

Asynchronous 16x16 burst access w/ DMA

Synchronous 16x16 burst access with DMA

(Max GPMC clock is 65 MHz)

Interrupt on DP/DM line state change for CEA-936-A

detect

VBUS MAX Voltage rating will be 6V for USB

Charging

RoHS Complaint 80 Terminal BGA MICROSTAR

JUNIOR Package

DESCRIPTION

The TUSB6015 is a USB 2.0 HS Peripheral Controller

designed for seamless interface to an external Host

processor through the NOR FLASH-like interface.

The NOR FLASH-like interface is a 16-bit, multiplexed

address/data, interface with support for synchronous

burst and single asynchronous read/write access.

Configuration registers are accessible via the

asynchronous chip select only; the End Point FIFO’s

are accessible via both the synchronous and

asynchronous chip selects.

The device also has eight user configurable general

purpose I/0 interface pins. The GPIO can be configured

as an interrupt or wakeup source. Some GPIO have

secondary NOR-flash DMA Request functionality.

The device is fully compliant with the Universal Serial

Bus Specification Rev. 2.0.

The ESD protection level is 2KV HBM (JESD22-

A114D), 500V CDM (JESD22-C101C).

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments

semiconductor products and disclaimers thereto appear at the end of this data sheet.

1

Copyright

PRODUCT PREVIEW information concerns products in the

formative or design phase of development. Characteristic data

and other specifications are design goals. Texas Instruments

reserves the right to change or discontinue these products

without notice.

WWW.TI.COM