STA309A datasheet(41/67 Pages) STMICROELECTRONICS

41 / 67 page

STA309A

Registers

41/67

Input channels must be mapped using the channel-mapping feature in the following manner

for bass management to be performed properly.

1: left front

2: right front

3: left rear

4: right rear

5: center

6: LFE

When AMBMXE = 1, biquad #7 on channels 1-6 are utilized for bass-management

crossover filter, this biquad is not user programmable in this mode. The XO settings

determine the crossover frequency used, the crossover is 2nd order for both high-pass and

low-pass with a -3 dB cross point. Higher order filters can be obtained be programming

coefficients in other biquads if desired.

It is recommended to use settings of 120-160 Hz when using small, single driver satellite

speakers as the frequency response of these speakers normally are limited to this region.

7.2.34

AUTO3 - AutoMode AM/pre-Scale/bass management scale (0x21)

Table 58.

CSS and RSS bits

Bitfield

CSS - center speaker size

Off

Large

Small

RSS - rear speaker size

Off

Large

Small

Table 59.

FSS and SUB bits

Bitfield

FSS - front speaker size

Large

Small

SUB - subwoofer

Off

AMAM2

AMAM1

AMAM0

AMAME

MSA

AMPS

Table 60.

AMPS bit

Bit

RST

Name

Description

0RW

AMPS

AutoMode pre-scale

0: -18 dB used for pre-scale when AMEQ = 00

1: user defined pre-scale when AMEQ = 00

Table 61.

MSA bit

Bit

RST

Name

Description

1RW

MSA

Bass management mix scale adjustment

0: -12 dB scaling on satellite channels in Config #1

1: no scaling on satellite channels in Config #1

STA309A датащи(PDF) 41 Page - STMicroelectronics

STA309A датащи(HTML) 41 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

датащи скачать

ссылки URL