3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INVENTORY

Remove all components from the carton and check them against the

following list.

A - Foam Vent Filter

B - Air Vent Cover

C - 9 x Spare protective film

D - Ceramic Nozzles 4, 5, 6 & 7mm (one nozzle is fitted)

E - PTFE tape

F - Gun c/w air and pickup hoses

G - 12V transformer & cable

ASSEMBLY

The unit is shipped fully assembled, except for the air vent filter and the gun

with attached hoses. These should be connected as follows:

First, remove the grid and all the

various loose components from within

the cabinet.

The end of the air inlet hose,

connected to the gun, is inserted

through the 16mm dia. hole in the

cabinet from the inside, as shown in

Fig 2. Ensure a flat washer is threaded

on to the adapter as shown.