M41T11

DC and AC parameters

19/29

5

DC and AC parameters

This section summarizes the operating and measurement conditions, as well as the DC and

AC characteristics of the device. The parameters in the following DC and AC Characteristic

tables are derived from tests performed under the Measurement Conditions listed in the

relevant tables. Designers should check that the operating conditions in their projects match

the measurement conditions when using the quoted parameters.

Figure 14.

AC testing input/output Waveform

Table 5.

1.

Output Hi-Z is defined as the point where data is no longer driven.

Parameter

M41T11

Unit

2.

Supply Voltage for SOH28 is 3.3V to 5.5V.

V

–40 to 85

°C

100

pF

Input Rise and Fall Times

≤50

ns

Input Pulse Voltages

V

Input and Output Timing Ref. Voltages

V

AI02568

0.8VCC

0.2VCC

0.7VCC

0.3VCC