GRAPHIC USER INTERFACE (GUI)

The modular based architecture allows all operational settings to

be accessed from one central ‘mode’ menu. For each mode, all

settings are visible and directly editable on one screen- showing

the whole test setup without the need to navigate through sub-

menus, as seen with other SMUs.

Single press auto fit graph automatically scales the primary

measurement data to best fit onto the display, allowing quick and

efficient analysis of measured data.

MULTIPLE INSTRUMENTS IN ONE

There are many source, load and measure operational modes

to choose from, each one allows advanced user settable

configurations to be created based around the specifics for

that mode. 8 EasySet pre-sets are also included to allow instant

use of the SMU in the simplest form, including: Power Supply,

Current Source, Load, Voltmeter, Ammeter, Ohmmeter, Insulation

resistance meter and Leakage current meter. These setups form

a convenient base, from which settings can be edited using the

manual setup mode configuration.

f

ADVANCED SWEEP ENGINE

As well as a high precision DC and pulsed

source and measure capabilities, the SMU4000

Series has a built-in sweep setting that supports

standard sweep parameters; such as:

Constant and pulsed sweep operation, double

sweep functions and linear & logarithmic

modes that are fully functional from the front

panel with a simple setup process involving only

a few steps, providing full graphical results on

screen.

Arbitrary list sweeps of up to 100K points can

be directly uploaded to the instrument via the

flash drive.

ADVANCED ON SCREEN GRAPHICAL RESULTS

A graphical representation of the buffered measurement results

can be viewed and explored on screen using the advanced graph

menu. Voltage or Current data can be viewed as voltammograms

for producing I-V curves and YT graphs to analyse a primary

measurement against time, in a linear formats. The flexible

graphing feature provides manual scaling alongside auto-range, as

well as an option to compare live data against a saved trace and

adjustable X and/or Y axis markers to pin-point a specific point in

the measured data on the graph.

ULTIMATE USER

EXPERIENCE

Custom

Pulse

Linear sweep

Pulsed linear

sweep

Logarithmic

sweep

Dual sweep

CONVENTIONAL SMU’S

AIM-TTI SMU

COMPACT- SMALLEST BENCH TOP SMU ON THE

MARKET

f

DATA HANDLING

Advanced math features, including: Deviation, % Deviation,

% Ratio and mx + b, alongside measured tolerance band sorting,

can be applied to live data readings.

f

MEASUREMENT STATISTICS

Real time calculated information for the primary and secondary

measurements, including minimum/maximum samples, average,

span and standard deviation are available to view at any time.