3

TUSB8041

www.ti.com

SLLSEE4E – JUNE 2014 – REVISED JUNE 2016

Submit Documentation Feedback

Copyright © 2014–2016, Texas Instruments Incorporated

Changes from Original (June 2014) to Revision A

Page

•

Changed the device status From: Preview To: Production ................................................................................................... 1

•

Changed Feature From: Supports USB Battery Charging Specification Revision 1.2 To: Supports Battery Charging ......... 1

•

Changed Feature From: Supports D+/D- Divider Mode To: D+/D- Divider Mode.................................................................. 1

•

Changed Description paragraph: "The TUSB8041 downstream ports provide...".................................................................. 3

•

Changed the Battery Charging Features section ................................................................................................................. 13

•

Changed Note 3 of Table 1 ................................................................................................................................................. 13

•

Changed Note 1 of Table 1 ................................................................................................................................................. 13

5 Description (Continued)

The TUSB8041 supports per port or ganged power switching and over-current protection, and supports battery

charging applications.

An individually port power controlled hub switches power on or off to each downstream port as requested by the

USB host. Also when an individually port power controlled hub senses an over-current event, only power to the

affected downstream port will be switched off.

A ganged hub switches on power to all its downstream ports when power is required to be on for any port. The

power to the downstream ports is not switched off unless all ports are in a state that allows power to be removed.

Also when a ganged hub senses an over-current event, power to all downstream ports will be switched off.

The TUSB8041 downstream ports provide support for battery charging applications by providing Battery

Charging Downstream Port (CDP) handshaking support. It also supports a Dedicated Charging Port (DCP) mode

when the upstream port is not connected. The DCP mode supports USB devices which support with the USB

Battery Charging and Chinese Telecommunications Industry Standard YD/T 1591-2009. In addition, an automatic

mode provides transparent support for BC devices and devices supporting Divider Mode charging solutions when

the upstream port unconnected.

The TUSB8041 provides pin strap configuration for some features including battery charging support, and also

provides customization though OTP ROM, I2C EEPROM or via an I2C/SMBus slave interface for PID, VID, and

custom port and phy configurations. Custom string support is also available when using an I2C EEPROM or the

I2C/SMBus slave interface.

The device is available in a 64-pin RGC package and is offered in a commercial version (TUSB8041) for

operation over the temperature range of 0°C to 70°C, and in an industrial version (TUSB8041I) for operation over

the temperature range of -40°C to 85°C.