Environmental Sensors Evaluation Kit Manual

R36UH0011EU0103 Rev.1.03

Jul 30, 2024

Page 11

Display Section

Button/Action

Description

Plot Control

Time Reference:

Choose the time reference for the X axes.

▪ Start of Day (of current measurement)

▪ Start of Measurement

▪ Manually pick a time in the graph using the mouse

▪ User defined reference time stamp

Graph Controls:

Button explanation from left to right for the top row:

▪ The 1st button auto fits all the data on the X and Y axes

▪ The 2nd button fits the Y axis to display all Data

▪ The 3rd button allows hovering the mouse to open a menu that provides

control on the X-range being displayed

▪ The 4th button will delete all current data from the plots (memory). The data

in the csv measurement file will remain.

Button explanation from left to right for the bottom row:

▪ Button 1 enables/disables the legend for the plot visualization

▪ Button2 locks/unlocks the Y axes so that it is unaffected by mouse

operations

▪ Button 3 locks/unlocks the X axes so that it is unaffected by mouse

operations

▪ The 4th button switches between bright and dark to improve contrast. This

display mode will also be used in the Simple Mode view.

Plot Visualization

The lower half of the graphical user interface provides a visualization of the

data. It shows the plots for the options selected. Also, in the upper left and

right corners of each graph, multiple parameters can be chosen from to

active/deactivate curves for sensor output of the corresponding axis.

2.1

Error Codes

Most common error messages are explained in Table 3.

Table 3. Most Common Errors

Error Code

Description and Solution

Error: Failed to open file <filename>

The selected data-file could not be opened for writing. Check

that the selected file is not locked by another application and

that you have write access to the folder the data files should be

stored in.

The RRH46410 cannot be used with the HiCom communication

board.

The RRH46410 cannot work with the older HiCom

communication board due to missing clock stretching.

<SENSOR> / <UID>: Sequence failed: <DETAILS>

There was an error executing the measurement sequence for

sensor <SENSOR> with unique ID <UID>. Additional details of

the error are displayed <DETAILS>.

The ES-Eval software will try to recover the error automatically

and continue measurements. If the same error occurs in

subsequent measurements, try to stop and restart the

measurement. If unsuccessful, try to reconnect the interface

board.