4

Products Related to Common Sockets and DIN Tracks

Note: 1. The structure of

@-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals.

2. Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.

*1. Use a #1 Phillips screwdriver to tighten the screws on this Socket.

*2. The structure does not resist flux. Manual soldering is recommended for this product.

Note: The structure of

@-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals.

* Use a #1 Phillips screwdriver to tighten the screws on this Socket.

* The structure does not resist flux. Manual soldering is recommended for this product.

Minimum Order Lot

The following models are available at the minimum order lot specified below.

Model

PTF (front-mounting), page 17

PT (back-mounting), page 18

Number

of pins

Solder terminals

Wrapping terminals

PCB terminals

8 pins

11 pins

14 pins

Number of pins

Model

PYF

PY

PTF

PT

Minimum order lot (pcs)

8 pins

PYF08A

PYF08M

PY08

PTF08A

PT08

10

11 pins

PYF11A

PY11

PTF11A

PT11

14 pins

PYF14A

PY14

PTF14A

PT14

PTF08A Approx. 47 g

PTF08A-E *1

PT08 Approx. 11 g

PT08QN

Approx. 10.4 g

PT08-0 *2

Approx. 8 g

PTF11A Approx. 61 g

PT11 Approx. 13 g

PT11QN

PT11-0 *2

Approx. 12.2 g

PTF14A Approx. 77 g

PTF14A-E *1

PT14 Approx. 17 g

PT14QN

Approx.

20 g

PT14-0 *2

Approx. 16.2 g

Model

P7S/P7SA, pages 20 and 21

Number

of pins

Front-mounting

PCB terminals

10 pins

14 pins

P7SA-10F Approx. 44 g

P7SA-10F-ND Approx. 44 g

P7SA-10P Approx. 9 g

P7S-14F-END Approx. 110 g

P7SA-14F Approx. 59 g

P7SA-14F-ND Approx. 59 g

P7S-14P-E Approx. 25 g

P7SA-14P Approx. 10 g

Model

P7LF (front-mounting), page 20

Number

of pins

6 pins

P7LF-06 Approx. 60 g

Note: Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are certified for standards.