HIP2101

FN9025 Rev.10.00

Page 10 of 15

Aug 8, 2019

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make

sure that you have the latest revision

.

DATE

REVISION

CHANGE

Aug 8, 2019

FN9025.10

Added Related Literature.

Updated Links throughout.

Updated Ordering information by removing obsolete parts, adding tape and reel part information,

updating notes, and adding Note 3.

Removed About Intersil section.

Updated disclaimer.

Updated POD M8.15C to latest revision changes are as follows:

-Updated Millimeter MIN and MAX values for A from: 1.43 MIN and 1.68 MAX to: 1.422 MIN and 1.700

MAX

-Updated Inch MAX for A from: 0.066 to: 0.067

-A1 Inches changed MIN from: 0.001 to 0.0, and A1 Millimeters MIN from 0.03 to 0.0

-L Millimeter Min changed from: 0.41 to 0.406

Nov 12, 2015

FN9025.9

- Updated Ordering Information Table on page2.

- Added Revision History.

- Added About Intersil Verbiage.

- Updated POD L12.4X4A to latest revision changes are as follow:

Updated to new POD format by removing table listing dimensions and moving dimensions onto

drawing.

Added Typical Recommended Land Pattern.

Bottom View changed "3.2 REF" TO "2.5 REF"

Typical Recommended Land Pattern changed "3.80" to "3.75"

From: Tiebar shown (if present) is a non-functional feature.

To: Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or

ends).

- Updated POD M8.15 to latest revision changes are as follow:

Updated to new POD format by removing table and moving dimensions onto drawing and adding land

pattern.

Changed in Typical Recommended Land Pattern the following:

2.41(0.095) to 2.20(0.087)

0.76 (0.030) to 0.60(0.023)

0.200 to 5.20(0.205)

Changed Note 1 "1982" to "1994"

- Updated POD M8.15C to most current version.

Removed "u" symbol from drawing (overlaps the "a" on Side View).