L5985 datasheet(15/36 Pages) STMICROELECTRONICS

15 / 36 page

L5985

Application informations

15/36

5.2

Inductor selection

The inductance value fixes the current ripple flowing through the output capacitor. So the

minimum inductance value in order to have the expected current ripple has to be selected.

The rule to fix the current ripple value is to have a ripple at 20%-40% of the output current.

The inductance value can be calculated by the following equation:

Equation 6

Where TON and TOFF are the on and off time of the internal power switch. The maximum

current ripple, at fixed Vout, is obtained at maximum TOFF that is at minimum duty cycle (see

previous section to calculate minimum duty). So fixing

∆I

L=20% to 40% of the maximum

output current, the minimum inductance value can be calculated:

Equation 7

where FSW is the switching frequency 1/(TON + TOFF).

For example for VOUT = 3.3V, VIN = 12V, IO = 2A and FSW = 250KHz the minimum

inductance value to have

∆I

L = 30% of IO is about 18uH.

The peak current through the inductor is given by:

Equation 8

So if the inductor value decreases, the peak current (that has to be lower than the current

limit of the device) increases. The higher is the inductor value, the higher is the average

output current that can be delivered, without reaching the current limit.

In the table below some inductor part numbers are listed.

Table 6.

Inductors

Manufacturer

Series

Inductor Value (

µH)

Saturation Current (A)

Wurth

TPC XLH

15 to 22

2.3 to 3.25

3.3 to 6.8

2.5 to 2.75

Coilcraft

MSS1038

15 to 18

3.2 to 3.6

MSS7341

3.3 to 6.2

2.5 to 3.5

∆I

OUT

–

------------------------------ T

⋅

OUT

-------------- T

OFF

⋅

MIN

OUT

∆I

MAX

----------------------------

MIN

–

-----------------------

⋅

LPK

∆I

--------

L5985 датащи(PDF) 15 Page - STMicroelectronics

L5985 датащи(HTML) 15 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

датащи скачать

ссылки URL