MODE CONTROL REGISTERS

USER-PROGRAMMABLE MODE CONTROLS

REGISTER MAP

RESERVED REGISTERS

PCM1680

www.ti.com.................................................................................................................................................. SLES133B – MARCH 2005 – REVISED OCTOBER 2008

The PCM1680 includes a number of user-programmable functions which are accessed via control registers. The

registers are programmed using the serial control interface which is discussed in the Mode Control section of this

data sheet. Table 5 lists the available mode control functions, along with the respective reset default conditions

and associated register index.

The mode control register map is shown in Table 6. The MSB of all registers is fixed to 0. Each register also

includes an index (or address) indicated by the IDX[6:0] bits.

Registers 0, 11, and 15 are reserved for factory use. To ensure proper operation, the user should not write to

these registers.

Table 5. User-Programmable Mode Controls

FUNCTION

RESET DEFAULT

REGISTER

BIT

Digital attenuation control, 0 dB to –63 dB

AT1[7:0], AT2[7:0], AT3[7:0], AT4[7:0],

0 dB, no attenuation

1–6, 16, 17

in 0.5-dB steps

AT5[7:0], AT6[7:0], AT7[7:0], AT8[7:0]

Soft mute control

Mute disabled

7, 18

MUT[6:1], MUT[8:7]

DAC1–DAC8 operation control

DAC1–DAC8 enabled

8, 19

DAC[6:1], DAC[8:7]

Audio data format control

24-bit, left-justified

9

FMT[2:0]

Digital filter roll-off control

Sharp roll-off

9

FLT

De-emphasis of all channels

De-emphasis all-channel function control

10

DMC

disabled

De-emphasis all-channel sample rate

44.1 kHz

10

DMF[1:0]

selection

Output phase select

Normal phase

10

DREV

Zero-flag polarity select

High

10

ZREV

Software reset control

Reset disabled

10

SRST

Oversampling rate control

x64, x32, x16

12

OVER

ZERO1: DATA1 Lch

Zero-flag combination select

13

AZRO[1:0]

ZERO2: DATA1 Rch

Digital attenuation mode select

0 to –63 dB, 0.5-dB step

13

DAMS

Zero-detect status (read-only, I2C

N/A

14

ZERO[8:1]

interface only)

Copyright © 2005–2008, Texas Instruments Incorporated

Submit Documentation Feedback

21

Product Folder Link(s): PCM1680