RFSW6024

5 MHz to 6 GHz Absorptive High Isolation SPDT Switch

Datasheet, Rev. J, April 21, 2023 | Subject to change without notice

10 of 13

www.qorvo.com

®

Package Marking and Dimensions

Marking: Part Number

– SW6024

Trace Code

  – Assigned by subcontractor

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012.

3. Contact plating: NiPdAu

PCB Mounting Pattern

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. Use 1 oz. copper minimum for top and bottom layer metal.

3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm

(#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.0

1”).

4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.