BM83 datasheet(66/76 Pages) MICROCHIP

66 / 76 page

12.

Appendix A: Regulatory Approval

The BM83 module(1) has received regulatory approval for the following countries:

• Bluetooth Special Interest Group (SIG) QDID:

– BM83 with Class 1(2) : 134083

– BM83 (3) : 134099

• United States/FCC ID: 2ADHKBM83SM1

• Canada/ISED:

– IC: 20266-BM83SM1

– HVIN: BM83SM1

• Europe/CE

• Japan/MIC: 005-102168

• Korea/KCC: R-C-mcp-BM83SM1

• Taiwan/NCC: CCAN19LP0730T1

Notes:

Module variants (test report covers all the variants)

– BM83SM1with shield-can. FCC/ISED certificate is applicable only for BM83SM1.

– BM83AM1 without shield-can. BM83 AM1 is not for sale. FCC/ISED and CE test reports cover

BM83AM1.

QDID for Class1 power level for BM83SM1, BM83AM1

QDID for Class2 power level for BM83SM1, BM83AM1

12.1

United States

The BM83 module has received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15

Subpart C “Intentional Radiators” single-modular approval in accordance with Part 15.212 Modular Transmitter

approval. Single-modular transmitter approval is defined as a complete RF transmission sub-assembly, designed to

be incorporated into another device, that must demonstrate compliance with FCC rules and policies independent of

any host. A transmitter with a modular grant can be installed in different end-use products (referred to as a host, host

product, or host device) by the grantee or other equipment manufacturer, then the host product may not require

additional testing or equipment authorization for the transmitter function provided by that specific module or limited

module device.

The user must comply with all of the instructions provided by the Grantee, which indicate installation and/or operating

conditions necessary for compliance.

A host product itself is required to comply with all other applicable FCC equipment authorization regulations,

requirements, and equipment functions that are not associated with the transmitter module portion. For example,

compliance must be demonstrated: to regulations for other transmitter components within a host product; to

requirements for unintentional radiators (Part 15 Subpart B), such as digital devices, computer peripherals, radio

receivers, etc.; and to additional authorization requirements for the non-transmitter functions on the transmitter

module (i.e., Suppliers Declaration of Conformity (SDoC) or certification) as appropriate (e.g., Bluetooth and Wi-Fi

transmitter modules may also contain digital logic functions).

12.1.1

Labeling and User Information Requirements

The BM83 module has been labeled with its own FCC ID number, and if the FCC ID is not visible when the module is

installed inside another device, then the outside of the finished product into which the module is installed must display

a label referring to the enclosed module. This exterior label should use the following wording:

BM83

Appendix A: Regulatory Approval

Datasheet

DS70005402C-page 66

BM83 датащи(PDF) 66 Page - Microchip Technology

BM83 датащи(HTML) 66 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

датащи скачать

ссылки URL