BMP280 datasheet(10/49 Pages) BOSCH

10 / 49 page

Bosch Sensortec | BMP280 Data sheet

10 |

Modifications reserved | Data subject to change without notice

Document number: BST-BMP280-DS001-26 Revision_1.26_102021

3. Functional description

The BMP280 consists of a Piezo-resistive pressure sensing element and a mixed-signal ASIC. The

ASIC performs A/D conversions and provides the conversion results and sensor specific

compensation data through a digital interface.

BMP280 provides highest flexibility to the designer and can be adapted to the requirements regarding

accuracy, measurement time and power consumption by selecting from a high number of possible

combinations of the sensor settings.

BMP280 can be operated in three power modes (see chapter 3.6):

•

sleep mode

•

normal mode

•

forced mode

In sleep mode, no measurements are performed. Normal mode comprises an automated perpetual

cycling between an active measurement period and an inactive standby period. In forced mode, a

single measurement is performed. When the measurement is finished, the sensor returns to sleep

mode.

A set of oversampling settings is available ranging from ultra low power to ultra high resolution setting

in order to adapt the sensor to the target application. The settings are predefined combinations of

pressure measurement oversampling and temperature measurement oversampling. Pressure and

temperature measurement oversampling can be selected independently from 0 to 16 times

oversampling (see chapter 3.3.1 and 3.3.2):

•

Temperature measurement

•

Ultra low power

•

Low power

•

Standard resolution

•

High resolution

•

Ultra high resolution

BMP280 is equipped with a built-in IIR filter in order to minimize short-term disturbances in the output

data caused by the slamming of a door or window. The filter coefficient ranges from 0 (off) to 16.

In order to simplify the device usage and reduce the high number of possible combinations of power

modes, oversampling rates and filter settings, Bosch Sensortec provides a proven set of

recommendations for common use-cases in smart-phones, mobile weather stations or flying toys (see

chapter 3.3):

•

Handheld device low-power (e.g. smart phones running Android)

•

Handheld device dynamic (e.g. smart phones running Android)

•

Weather monitoring (setting with lowest power consumption)

•

Elevator / floor change detection

•

Drop detection

•

Indoor navigation

BMP280 датащи(PDF) 10 Page - Bosch Sensortec GmbH

BMP280 датащи(HTML) 10 Page - Bosch Sensortec GmbH

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

датащи скачать

ссылки URL