Figure 1: Bracket Mount Examples for Two-Post Rack Mount

Figure 2: Improper Bracket Mount Examples for Two-Post Rack Mount

3.2.1

Attaching Mounting Brackets to the Chassis

This procedure attaches mounting brackets to the switch chassis (Figure 3: Attaching the Mounting

Brackets to the Switch Chassis).

1. Align the mounting brackets with the attachment pins to obtain the desired mounting position.

2. Place the bracket flush on the chassis with attachment pins protruding through key-openings.

3. Slide the bracket toward the front flange until the bracket clip locks with an audible click.

Figure 3: Attaching the Mounting Brackets to the Switch Chassis

To remove the mounting bracket from the chassis, lift the front edge of the mounting bracket clip

with a flathead screwdriver and slide the bracket away from the front flange (opposite from the

installation direction).

3.2.2

Inserting the Switch into the Rack

This procedure attaches the switch to the rack.

Note: Front mount shown.

8