| поискавой системы для электроныых деталей |
|
CS4351 датащи(PDF) 29 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS4351 датащи(HTML) 29 Page - Cirrus Logic |
|
29 / 37 page ![]() DS566F1 29 CS4351 Soft Ramp and Zero Cross Soft Ramp and Zero Cross Enable dictate that signal level changes, either by attenuation changes or mut- ing, will occur in 1/8 dB steps and be implemented on a signal zero crossing. The 1/8 dB level change will occur after a time-out period between 512 and 1024 sample periods (10.7 ms to 21.3 ms at 48 kHz sample rate) if the signal does not encounter a zero crossing. The zero cross function is independently monitored and implemented for each channel. 6.6.2 Soft Volume Ramp-Up After Error (RMP_UP) Bit 5 Function: When set to 1 (default), an un-mute will be performed after executing a filter mode change, after a LRCK/MCLK ratio change or error, and after changing the Functional Mode. This un-mute is affected, sim- ilar to attenuation changes, by the Soft and Zero Cross bits in the Volume and Mixing Control register. When set to 0, an immediate un-mute is performed in these instances. Note: For best results, it is recommended this feature be used in conjunction with the RMP_DN bit. 6.6.3 Soft Ramp-Down Before Filter Mode Change (RMP_DN) Bit 4 Function: When set to 1 (default), a mute will be performed prior to executing a filter mode change. This mute is affected, similar to attenuation changes, by the Soft and Zero Cross bits in the Volume and Mixing Control register. When set to 0, an immediate mute is performed prior to executing a filter mode change. Note: For best results, it is recommended that this feature be used in conjunction with the RMP_UP bit. 6.6.4 Interpolation Filter Select (FILT_SEL) Bit 2 Function: When set to 0 (default), the Interpolation Filter has a fast roll off. When set to 1, the Interpolation Filter has a slow roll off. The specifications for each filter can be found in the “Combined Interpolation & On-Chip Analog Filter Re- sponse” section on page 8, and response plots can be found in Figures 15 to 36. 6.7 Misc Control - Register 08h 7 6 5 432 10 PDN CPEN FREEZE Reserved Reserved Reserved Reserved Reserved 1 0 0 000 00 |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |