PowerLogic™ PM5100, PM5300 and PM5500 series

The PowerLogic™ PM5000 power meter is the ideal fit for cost management applications. Designed

for use in both energy management systems and building management systems, it provides the

measurement capabilities needed to allocate energy usage, perform tenant metering and sub-

billing, pin-point energy savings, optimize equipment efficiency and utilization, and perform a high

level assessment of the power quality of the electrical network.

In a single 96 x 96 mm unit, with a graphical display, (plus optional remote display) all three phases,

neutral and ground can be monitored simultaneously. The bright, anti-glare display features large

characters and powerful backlighting for easy reading even in extreme lighting conditions and

viewing angles. Easy to understand menus, text in 8 selectable languages, icons and graphics

create a friendly environment to learn about your electrical network. Ethernet gateway and

enhanced cyber security. These are highly accurate devices with global billing certifications.

Applications

•

Cost management: Cost saving opportunities become clear once you understand how

and when your facility uses electricity. The PowerLogic™ PM5000 series meters are ideal

for:

–

Sub-billing / tenant metering: Allows a landlord, property management firm, condominium

association, homeowners association, or other multi-tenant property to bill tenants for

individual measured utility (electricity) usage depending on the local regulations. MID

approved meters for billing applications across Europe.

–

Cost allocation: Allocate energy costs between different departments (HVAC, indoor and

outdoor lighting, refrigeration, etc.), different parts of an industrial process or different

cost centres. Cost allocation systems can help you save money by making changes

to your operation, better maintaining your equipment, taking advantage of pricing

fluctuations, and managing your demand.

•

Network management: Improving reliability of the electrical network is key for success

in any business. Monitoring values such as voltage levels, harmonics distortions, voltage

unbalance, residual current, voltage sag and swell will help you to ensure proper operation

and maintenance of your electrical network and equipment. PowerLogic™ PM5000 series

meters are the perfect tool for:

–

Basic Power Quality monitoring: Power quality phenomena can cause undesirable

effects such as heating in transformers, capacitors, motors, generators and

misoperation of electronic equipment and protection devices.

–

Min/ Max monitoring (with timestamp): Understanding when electrical parameters,

such as voltage, current and power demand, reach maximum and minimum values will

give you the insight to correctly maintain your electrical network and assure equipment

will not be damaged.

–

Alarming: alarms help you to be aware of any abnormal behaviour on the electrical

network in the moment it happens.

–

WAGES monitoring: take advantage of the input metering on PM5000 meters to

integrate measurements from third party devices such as water, air, gas, electricity or

steam meters.

–

Residual current monitoring: measures leakage current flowing in TN & TT network

system.

–

Voltage sags and swells: measures and captures wave form in the event of voltage

sags and swells in the network.

•

Main characteristics

–

Easy to install

–

Mounts using two clips, in standard cut out for DIN 96 x 96 mm, no tools required.

Compact meter with 72 mm (77 mm for PM5500) depth connectable up to 690

V L-L without voltage transformers for installations compliant with category III.

Optional remote display (PM5563). Ethernet gateway functionality via RS-485 port.

–

Easy to operate

–

Intuitive navigation with self-guided, language selectable menus, six lines, four

concurrent values. Two LEDs on the meter face help the user confirm normal

operation with a green LED - heartbeat/communications indicator, and the amber

LED - customizable either for alarms or energy pulse outputs. Onboard web pages

(PM5500) show real-time and logged information, and verify communications.

–

Easy circuit breaker monitoring and control

–

The PM5300 provides two relay outputs (high performance Form A type) with

capability to command most of the circuit breaker coils directly. For Digital Inputs,

monitored switches can be wired directly to the meter without external power

supply by using whetting output voltage.

–

PM5500 series have 4 status inputs (digital) and 2 digital output (solid state) to use

for WAGES monitoring, control and alarm annunciation.

Accurate energy measurement for precise cost allocation:

PM5100

PM5300

PM5500

PM5600

PM5700

IEC 62053-22 (Active Energy)

Class 0.5S

Class 0.5S

Class 0.2S

Class 0.2S

Class 0.2S

IEC 62053-23 (Reactive Energy)

Class 1.0

Class 1.0

Class 1.0

Class 1.0

Class 1.0

PowerLogic™ PM5563 remote display rear ISO

PowerLogic™ PM5563 remote display front ISO

PowerLogic™ PM5563 meter

PM5000 series

BASIC MULTI-FUNCTION METERING

FUNCTIONS AND CHARACTERISTICS

3

Version: 1.0 - 04/02/2023

PLSED310052EN