RT7204E

F

Copyright © 2024 Richtek Technology Corporation. All rights reserved.

is a registered trademark of Richtek Technology Corporation.

www.richtek.com

RT7204E_DS-00

May 2024

14

13

Typical Application Circuit

(Note 7)

+

+

+

Note 7

.

1.

The selection of resistors R1, R2, R3, and capacitors C1, C3, and C4 should be based on the feedback compensation

design requirements of the closed-loop power stage.

2.

The R4 is an optional component for VIN detection. If used, it is recommended to select a resistor with a tolerance of

1%.

3.

The value of resistor R5 is determined by the desired turn-on and turn-off speed for power path.