DSP56362P datasheet(14/152 Pages) FREESCALE

14 / 152 page

Interrupt and Mode Control

DSP56362 Technical Data, Rev. 4

2-8

Freescale Semiconductor

2.6

Interrupt and Mode Control

The interrupt and mode control signals select the chip’s operating mode as it comes out of hardware reset.

After RESET is deasserted, these inputs are hardware interrupt request lines.

Table 2-8 Interrupt and Mode Control

Signal Name

Type

State during Reset

Signal Description

MODA/IRQA

Input

Mode Select A/External Interrupt Request A—MODA/IRQA is an

active-low Schmitt-trigger input, internally synchronized to the DSP clock.

MODA/IRQA selects the initial chip operating mode during hardware reset

and becomes a level-sensitive or negative-edge-triggered, maskable

interrupt request input during normal instruction processing. MODA,

MODB, MODC, and MODD select one of 16 initial chip operating modes,

latched into the OMR when the RESET signal is deasserted. If IRQA is

asserted synchronous to CLKOUT, multiple processors can be

resynchronized using the WAIT instruction and asserting IRQA to exit the

wait state. If the processor is in the stop standby state and the

MODA/IRQA pin is pulled to GND, the processor will exit the stop state.

This input is 5 V tolerant.

MODB/IRQB

Input

Mode Select B/External Interrupt Request B—MODB/IRQB is an

active-low Schmitt-trigger input, internally synchronized to the DSP clock.

MODB/IRQB selects the initial chip operating mode during hardware reset

and becomes a level-sensitive or negative-edge-triggered, maskable

interrupt request input during normal instruction processing. MODA,

MODB, MODC, and MODD select one of 16 initial chip operating modes,

latched into OMR when the RESET signal is deasserted. If IRQB is

asserted synchronous to CLKOUT, multiple processors can be

re-synchronized using the WAIT instruction and asserting IRQB to exit the

wait state.

This input is 5 V tolerant.

MODC/IRQC

Input

Mode Select C/External Interrupt Request C—MODC/IRQC is an

active-low Schmitt-trigger input, internally synchronized to the DSP clock.

MODC/IRQC selects the initial chip operating mode during hardware reset

and becomes a level-sensitive or negative-edge-triggered, maskable

interrupt request input during normal instruction processing. MODA,

MODB, MODC, and MODD select one of 16 initial chip operating modes,

latched into OMR when the RESET signal is deasserted. If IRQC is

asserted synchronous to CLKOUT, multiple processors can be

resynchronized using the WAIT instruction and asserting IRQC to exit the

wait state.

This input is 5 V tolerant.

DSP56362P датащи(PDF) 14 Page - Freescale Semiconductor, Inc

DSP56362P датащи(HTML) 14 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

датащи скачать

ссылки URL