TMD2672 datasheet(33/44 Pages) OSRAM

поискавой системы для электроныых деталей

TMD2672 датащи(PDF) 33 Page - OSRAM GmbH

33 / 44 page

Page 32

ams Datasheet

Document Feedback

[v1-00] 2015-Mar-23

TMD2672 − Application Information: Hardware

Figure 42:

Proximity Sensing Using Single Power Supply

VBUS in the above figures refers to the I²C bus voltage which is

either VDD or 1.8V. Be sure to apply the specified I²C bus voltage

shown in the Ordering Information table for the specific device

being used.

The I²C signals and the Interrupt are open-drain outputs and

require pull-up resistors. The pull-up resistor (RP) value is a

function of the I²C bus speed, the I²C bus voltage, and the

capacitive load. The ams EVM running at 400kbps, uses 1.5kΩ

resistors. A 10kΩ pull-up resistor (RPI) can be used for the

interrupt line.

Voltage

Regulator

. 10 mF

TMD2672

INT

SDA

SCL

VDD

LEDA

GND

VBUS

RPI

LDR

LEDK

Вашему бизинису помогли Аллдатащит? [ DONATE ]
Что такое Аллдатащит \| реклама \| контакт \| Конфиденциальность \| Ссылка на техническое описание \| обмен ссыками \| поиск по производителю All Rights Reserved©Alldatasheet.com
Mirror Sites English : Alldatasheet.com \| English : Alldatasheet.net \| Chinese : Alldatasheetcn.com \| German : Alldatasheetde.com \| Japanese : Alldatasheet.jp Russian : Alldatasheetru.com \| Korean : Alldatasheet.co.kr \| Spanish : Alldatasheet.es \| French : Alldatasheet.fr \| Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com \| Polish : Alldatasheet.pl \| Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in \| Mexican : Alldatasheet.com.mx \| British : Alldatasheet.co.uk \| New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com \| icmetro.com

Вашему бизинису помогли Аллдатащит? [ DONATE ]

Family Site : ic2ic.com | icmetro.com