Type 8640

7 | 32

Visit product website 

1.3. Solenoid valves Type 0460

• The solenoid valve Type 0460  consists of a pneumatic valve body fitted with a double coil

pilot valve.

• The principle allows switching of high pressures together with low power consumption and fast

switching times.

• All valves are equipped with manual override as a standard.

• Further information about ordering information can be found in chapter “Solenoid valves

Type 0460” on page 24.

• Further information about further valve options can be found in chapter “9.4. Ordering chart

accessories” on page 27.

Pilot valve Type

Type 0460

Circuit function

5/2-way and 5/3-way bistable

Product properties

Materials

Body

Aluminium

Seal

NBR

Width per station

11 mm

Manual override

Standard

Pneumatic module

With plug-in coupling, Ø 6 mm, Ø ¼"

Performance data

Pressure data

Overpressure to atmospheric pressure

Flow rate Q

Nn value air

300 l/min measured at + 20 °C, 6 bar pressure at valve inlet and 1 bar differential pressure, see

“9.3. Ordering chart replacement valves” on page 23.

Switching time

Measured according to ISO 12238

Electrical data

Operating voltage

24 V DC ± 10 %

Medium data

Operating medium

Oil-free or lubricated compressed dry air, neutral gases (5 μm filter recommended)

Process/Port connection & communication

Service port 2 (A), 4 (B)

Plug-in coupling Ø 6 mm, Ø ¼"

Air supply connection

1 (P), 3 (R), 5 (S)

G ¼

Electrical connection (on valve)

Rectangular plug, 3-pin, grid 2.54 mm

Environment and installation

Installation position

As required, preferably with actuator upright

Mounting condition

With 2 screws M1.7 × 23