54

Am29DL640G

June 6, 2005

Revision B3 (July 21, 2004)

“Am29DL640G Autoselect Codes, (High Voltage

Method)” on page 15

Replaced “80h (factory locked), 00h (not factory

locked)” with “81h (factory locked), 01h (not factory

locked)”.

“Am29DL640G Command Definitions” on page 28

In SecSI Sector Factory Protect row, Data column -

Replaced “80/00” with “81/01.

(Note 10) - Replaced “The data is 80h for factory

locked and 00h for not factory locked” with “The data is

81h for factory locked and 01h for not factory locked”.

Global Changes

Replaced “80 µ” with “tSEA µ”.

Replaced “20 µ” with “tSEL µ”.

Replaced “1µ” with “tPSP µ”.

Replaced “100 µ” with “tASP µ”.

Replaced “50 µ” with “tSEA µ”.

“Erase and Program Operations” on page 40

Added last four columns to table.

Revision B4 (October 15, 2004)

Cover page and Title page

Added notation to superseding documents.

Revision B5(June 6, 2005)

Modified disclaimers

Colophon

The products described in this document are designed, developed and manufactured as contemplated for general use, including without limita-

tion, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as con-

templated (1) for any use that includes fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the

public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility,

aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for

any use where chance of failure is intolerable (i.e., submersible repeater and artificial satellite). Please note that Spansion will not be liable to

you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any semiconductor de-

vices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design mea-

sures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating

conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign

Exchange and Foreign Trade Law of Japan, the US Export Administration Regulations or the applicable laws of any other country, the prior au-

thorization by the respective government entity will be required for export of those products.

Trademarks and Notice

Copyright © 2005 Advanced Micro Devices, Inc. All rights reserved.

AMD, the AMD logo, and combinations thereof are registered trademarks of Advanced Micro Devices, Inc.

ExpressFlash is a trademark of Advanced Micro Devices, Inc.

Product names used in this publication are for identification purposes only and may be trademarks of their respective companies.