LP8733 datasheet(74/86 Pages) TI

номер детали	LP8733

подробное описание детали	LP8733xx Dual High-Current Buck Converter and Dual Linear Regulator

PDF	86 Pages

Scroll/Zoom	100%

производитель	TI [Texas Instruments]

домашняя страница	http://www.ti.com

Logo

74 / 86 page

RLOAD = 3.3 Ω

VOUT = 1 V

Figure 8-46. LDO Start-Up

ILOAD = 0 A

VOUT = 1 V

Figure 8-47. LDO Shutdown

IOUT = 0 A → 0.3 A → 0 A

TR = TF = 1 µs

Figure 8-48. LDO Transient Load Step Response

Figure 8-49. LDO VOUT Transition from 1.8 V to 1.2

Figure 8-50. LDO VOUT Transition from 1.2 V to 1.8

Start-up

delay is 500

µs

Figure 8-51. LDO Start-Up With Short on Output

9 Power Supply Recommendations

The device is designed to operate from an input voltage supply range between 2.8 V and 5.5 V. The VANA

input and VIN_Bx buck inputs must be connected together, and they must use the same input supply. This input

supply must be well regulated and able to withstand maximum input current and maintain stable voltage without

voltage drop even at load transition condition. The resistance of the input supply rail must be low enough that

the input current transient does not cause too high a drop in the LP8733xx supply voltage that can cause false

UVLO fault triggering. If the input supply is located more than a few inches from the LP8733xx, additional bulk

capacitance may be required in addition to the ceramic bypass capacitors. The VIN_LDOx LDO input supply

voltage range is 2.5 V to 5.5 V and can be higher or lower than VANA supply voltage.

LP8733

SNVSBK2A – SEPTEMBER 2019 – REVISED JUNE 2021

www.ti.com

Submit Document Feedback

Product Folder Links: LP8733

LP8733 датащи(PDF) 74 Page - Texas Instruments