WM8738

Production Data

w

PD Rev 4.4 August 2006

5

ABSOLUTE MAXIMUM RATINGS

Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at

or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical

Characteristics at the test conditions specified.

ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible

to damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage

of this device.

Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage

conditions prior to surface mount assembly. These levels are:

MSL1 = unlimited floor life at <30

°C / 85% Relative Humidity. Not normally stored in moisture barrier bag.

MSL2 = out of bag storage for 1 year at <30

°C / 60% Relative Humidity. Supplied in moisture barrier bag.

MSL3 = out of bag storage for 168 hours at <30

°C / 60% Relative Humidity. Supplied in moisture barrier bag.

CONDITION

MIN

MAX

Digital supply voltage

-0.3V

+4.2V

Analogue supply voltage

-0.3V

+7.0V

Voltage range digital inputs

DGND -0.3V

+7.0V

Voltage range analogue inputs

AGND -0.3V

AVDD +0.3V

Master Clock Frequency

37MHz

-25

°C

+85

°C

Storage temperature prior to soldering

30

°C max / 85% RH max

Storage temperature after soldering

-65

°C

+150

°C

Notes

1.

Analogue and digital grounds must always be within 0.3V of each other.

2.

The digital supply voltage must always be less than or equal to the analogue supply voltage.

RECOMMENDED OPERATING CONDITIONS

PARAMETER

SYMBOL

TEST

CONDITIONS

MIN

TYP

MAX

UNIT

Digital supply range

DVDD

3.0

3.6

V

Analogue supply range

AVDD

3.0

5.5

V

Ground

DGND,AGND

0

V

Analogue supply current

AVDD = 5.0V,

(DVDD at 3.3V)

30

mA

Analogue supply current

AVDD = 3.3V,

(DVDD at 3.3V)

19

mA

Supply Current Low Power

Mode

AVDD = 5.0V

(DVDD at 3.3V)

180

µA

Supply Current Low Power

Mode

AVDD = 3.3V

(DVDD at 3.3V)

110

µA

Digital supply current

DVDD = 3.3V

AVDD = 5.0V or 3.3V

4

mA