The Specialist In Drum Handling Equipment

201 Series

Wheeled Portable Drum Rollers

morsedrum.com

Copyright 2023 - Morse Mfg. Co., Inc.

Spec Sheet F201

(Updated 20 Jun, 2023)

4

Guard Enclosure Kits with Safety Interlock

Guard

Enclosure Kit

Guard Enclosure Kit with Safety Interlock

Gate

Switch

GEK-201-1

Fits Portable Drum Roller with 1-phase electric motor

AC

GEK-201-3

Fits Portable Drum Roller with 3-phase electric motor

AC

GEK-201-E1

Fits Portable Drum Roller with Explosion-proof 1-phase electric motor

AC

GEK-201-E3

Fits Portable Drum Roller with Explosion-proof 3-phase electric motor

AC

GEK-201-A

Fits Portable Drum Roller with Air motor

Air

* Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G

Enclosures for Morse Portable

Drum Rollers have a safety

interlock to automatically shut

off the drum roller when the gate

is opened. Open the enclosure

gate, place your drum onto the

drum roller, then close the gate

to allow operation. Connections

are included for single-phase AC

and for air powered models only.

Customer to provide controls and

connections for 3-phase AC and

for explosion-proof AC models.

Install all Morse Drum Rotators

in accordance with OSHA

requirements for enclosure and

safety interlock, etc. Drum roller

automatically turns off when

enclosure door is opened.

For OSHA compliance, see OSHA

subpart O.1910.212(a)(4) “Barrels,

containers, and drums. Revolving

drums, barrels, and containers

shall be guarded by an enclosure

which is interlocked with the drive

mechanism, so that the barrel,

drum, or container cannot revolve

unless the guard enclosure is in

place.”

Power connections and motor

controls must comply with

applicable codes.

Comply with OSHA Requirements

(Drum Roller Sold Separately)

Outside Post-To-Post Dimensions

L52” x W40” x H63.25” (132 x 102 x 161 cm)