The Specialist In Drum Handling Equipment

201 Series

Wheeled Portable Drum Rollers

MADE

IN

USA

Copyright 2023 - Morse Mfg. Co., Inc.

Spec Sheet F201

(Updated 20 Jun, 2023)

1

service@morsedrum.com

103 Kuhn Rd.

Syracuse, NY, 13208 USA

morsedrum.com

(315) 437-8475

Agitate your drum’s contents without even

opening the drum! Incorporate important

stratified ingredients and eliminate

sediment in the bottom of your drum.

Mixing in closed drums eliminates the

hazards, worker exposure, and messy

cleanup associated with insertion mixers.

This compact, portable mixer and drum

cradle rolls a closed drum to agitate the

contents. You may also dispense directly

from your drum through a faucet. The built-

in tipping bar provides leverage to ease

loading and unloading. The sides and back

are enclosed to protect the drive.

Drum Sizes

•

Roll a 6” to 28” (15.2 to 71 cm)

diameter drum

•

Up to 38” (97 cm) tall. Relocate

wheels to accommodate various steel

drum sizes.

•

The tipping lever will ONLY engage a

drum 30” (76.2 cm) or taller

Drum RPM

•

Fixed speed models roll a 22.5” (57.2 cm)

diameter drum at 20 RPM (16 RPM on 50Hz models)

•

Variable speed models roll a drum from

15 to 24 RPM (13 to 20 RPM on 50Hz models)

Capacity of Wheeled Models

•

Liquid load: 500 Lb. (227 kg)

•

Dry load 300 Lb. (136 kg)

Maximum ambient operating temperature

•

140o F (60o C)

Mix Contents of Closed Steel Drum

40”

101.6 cm

16.75”

42.5 cm

19.25”

48.9 cm

34.75”

88.3 cm

21”

53.3 cm

Simple Rock-Over Loading

Built-in tipping lever facilitates loading.

Frame shape and height make loading

easier. Note: Tipping lever only engages

drum 30” (76.2 cm) or taller.

Dispense Directly from Drum

Drain the contents

of a drum directly

into a smaller

container for

use as needed.

A closed faucet

can be in place

while the drum is

rotated.

Roll a 1 to 5 Gallon Can

Kit # 1-5P

Install this Idler

Attachment kit

to extend the

usefullness of

your drum roller.

Easily attached

with 4 bolts, the

spacers adjust to

roll a 1 to 5 gallon

(4 to 20 liter)

cylindrical can.

Rolls a 5-gallon

(20L) can at

approximately

double the RPM

of a 55-gallon (210L) drum.

Options and Accessories

Roll a Plastic Drum

Option # POLY-201

Factory installed option

to roll a plastic drum on

portable drum roller.

•

Extra wheels to

support flexible soft-

sided plastic drum

•

End stop to prevent

drum from traveling

•

Chain to assist in

pulling upright drum

over into rolling

position

POLY-201 is

NOT a drum

roller by itself.

Adds 62 Lb. (28.1 kg) to the ship weight and requires a skid.

Kit # POLY-201FI

Kit for customer to install on wheeled 201 Series drum roller.

•

Use common steel drum for mixing

•

No permanent container to purge between batches

•

Use separate drum for each batch

Top Rim Hook

Engage Top Rim Hook to help in tipping

it over into rolling position.

Internal Components

Large sprockets and roller chain for

years of reliable drum rolling.

Kick Stand

Deploy Kick Stand to support drum roller

in upright position.