7 of 49

January 18, 2011

CPS-10Q

CPS-10Q Datasheet

2010 Integrated Device Technology, Inc. All rights reserved.

8 Absolute Maximum Ratings(1)

Notes:

1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional

operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect reliability.

2. This is a steady-state DC parameter that applies after the power supply has reached its nominal operating value. Power sequencing is not necessary; however, the

voltage on any Input or I/O pin cannot exceed its corresponding supply voltage during power supply ramp up.

3. Ambient Temperature under DC Bias. No AC Conditions.

Symbol

Rating

Commercial &

Industrial

Unit

VTERM (VDD3)

VDD3 Terminal Voltage with Respect to GND

-0.5 to 3.6

V

VTERM(2) (VDD3-supplied interfaces)

Input or I/O Terminal Voltage with Respect to GND

-0.3 to VDD3+0.3

V

VTERM (VDD)VDD Terminal Voltage with Respect to GND

-0.5 to 1.5

V

VTERM(2) (VDD-supplied interfaces)

Input or I/O Terminal Voltage with Respect to GND

-0.3 to VDD+0.3

V

VTERM (VDDS)VDDS Terminal Voltage with Respect to GND

-0.5 to 1.5

V

VTERM(2) (VDDS-supplied interfaces)

Input or I/O Terminal Voltage with Respect to GNDS

-0.3 to VDDS+0.3

V

VTERM (VDDA)VDDA Terminal Voltage with Respect to GND

-0.5 to 1.5

V

VTERM(2) (VDDA-supplied interfaces)

Input or I/O Terminal Voltage with Respect to GNDS

-0.3 to VDDA+0.3

V

TBIAS(3)

Temperature Under Bias

-55 to +125

C

TSTG

Storage Temperature

-65 to +150

C

TJN

Junction Temperature

+125

C

IOUT (For VDD3 = 3.3V)

DC Output Current

30

mA

IOUT (For VDD3 = 2.5V)

DC Output Current

30

mA

Table 1 Absolute Maximum Ratings