High-voltage contactor

See table on page 8

Gas-filled contactor for high-voltage DC switching

HVC43 series

PPD AB PD / PPD AB PM

Version: 01 / 2021-05-04

Please read Cautions and warnings and

Page 10 of 12

Important notes at the end of this document.



In case two contactors are mounted in close proximity, a clearance distance of 10 mm has to be

kept.



The operating life of the contactor can be affected by strong magnetic fields. Please ensure that

there are no magnetic field sources in close proximity and avoid nearby installed heat sources.



The contactor must not be operated without any load. This may increase the contact resistance.



Contactors may become hot during extended periods of current overload (burn hazard).



Contactors must be handled with care and must not be dropped.



Damaged contactors must not be re-used.



The manufacturer cannot be held liable for failures caused by condensation or icing. The

customer has to apply suitable measures to avoid these circumstances.



This contactor is not waterproof.



It must be ensured that during usage, storage, or transportation direct sunlight is avoided.

The ambient temperature during usage must not exceed the value specified in this data sheet.



It is forbidden to use this contactor in atmospheres loaded with organic solvents (alcohol,

petroleum, etc.) or strong alkaline substances (ammoniac, acids in general, etc.).



It must be ensured that during installation and operation no kind of foreign matter adheres to the

main contact. Especially oils and silicones must be avoided.



It is forbidden to attach any kind of additional construction to or on the contactor.

Display of ordering codes for TDK Electronics products

The ordering code for one and the same product can be represented differently in data sheets, data books,

other publications, on the company website, or in order-related documents such as shipping notes, order

confirmations and product labels. The varying representations of the ordering codes are due to

different processes employed and do not affect the specifications of the respective products.

Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes.