High-voltage contactor

See table on page 8

Gas-filled contactor for high-voltage DC switching

HVC43 series

PPD AB PD / PPD AB PM

Version: 01 / 2021-05-04

Please read Cautions and warnings and

Page 8 of 12

Important notes at the end of this document.

Nomenclature of type name

Ordering codes

Continuous current

[ADC]

Coil voltage

[VDC]

Type name

Ordering code

150

12

HVC43-150A-12

B88269X3230C 11

24

HVC43-150A-24

B88269X3330C 11

200

12

HVC43-200A-12

B88269X3220C 11

24

HVC43-200A-24

B88269X3340C 11

250

12

HVC43-250A-12

B88269X3210C 11

24

HVC43-250A-24

B88269X3350C 11

Notes:

1

The diameter must be matched to actual current and operation temperature (see: Cautions and warnings).

2

Detection time 10 µs: micro-openings ≤ 10 µs may occur between main contacts

3

Referring to IEC 60068-2-27

4

Referring to IEC 60068-2-6

5

Referring to IEC 60068-2-64

6

Freezing or condensing must be avoided.

7

Valid for base-model without accessory, other configurations will lead to deviations.

8

The specified values apply to unused contactors acc. to IEC 61810-1.

9

Referring to IEC 60947-4-1, 6000 operations make & break

10 Referring to IEC 60947-4-1, 50% of operations in positive and 50% in negative direction (see: Cautions and warnings)

11 Detection limit 10 mA

12 Measured at rated control voltage UC including contact bouncing time.

13 Specified referring to JIS C 5442 (temperature 15 °C to 35 °C, humidity 25% to 85% RH).

14

End of life is reached when insulation resistance is < 50 MΩ at 1000 V.

15 Duty cycle 50%, cycle duration 1 s, value represents B10 life time acc. to Weibull analysis.

16 Duty cycle is 1% and cycle duration is 600 s.

17

Tested with resistive loads with τ ≤ 1 ms

18 No fire and no explosion will occur after this break

19 Tolerance ±10% at thermal equilibrium

20 For „make & break life curves“ duty cycle is 10% and cycle duration is 6 s. For “break-only life curves” duty cycle is 1%

and cycle duration is 600 s.