AC01 datasheet(23/24 Pages) PHILIPS

23 / 24 page

2000 Oct 20

BCcomponents

Product specification

Cemented wirewound resistors

AC01/03/04/05/07/10/15/20

TESTS AND REQUIREMENTS

Essentially all tests are carried out in accordance with the

schedule of “IEC publications 60115-1 and 60115-4”,

category 40/200/56 (rated temperature range

−40 °Cto

+200

°C; damp heat, long term, 56 days). The testing also

covers the requirements specified by EIA and EIAJ.

The tests are carried out in accordance with IEC publication

60 068, “Recommended basic climatic and mechanical

robustness testing procedure for electronic components”

and under standard atmospheric conditions according to

“IEC 60 068-1”, subclause 5.3.

In Table 5 the tests and requirements are listed with

reference to the relevant clauses of

“IEC publications 60115-1, 115-4 and 68” ; a short

description of the test procedure is also given. In some

instances deviations from the IEC recommendations were

necessary for our method of specifying.

All soldering tests are performed with mildly activated flux.

Table 5

Test procedures and requirements

IEC

60115-1

CLAUSE

IEC

60068

TEST

METHOD

TEST

PROCEDURE

REQUIREMENTS

Tests in accordance with the schedule of IEC publication 60115-1

4.15

robustness of

resistor body

load 200

±10 N

no visible damage

∆R/R max.: ±0.5% + 0.05 Ω

4.16

robustness of

terminations:

tensile all samples

load 10 N; 10 s

bending half

number of samples

load 5 N 90

°, 180°, 90°

torsion other half of

samples

× 180° in opposite directions

no visible damage

∆R/R max.: ±0.5% + 0.05 Ω

4.17

solderability

2 s; 235

°C; flux 600

good tinning; no damage

4.18

resistance to soldering

heat

thermal shock: 3 s; 350

°C;

2.5 mm from body

∆R/R max.: ±0.5% + 0.05 Ω

4.19

14 (Na)

rapid change of

temperature

30 minutes at

−40 °C and

30 minutes at +200

°C; 5 cycles

no visible damage

∆R/R max.: ±1% + 0.05 Ω

4.22

vibration

frequency 10 to 500 Hz; displacement

0.75 mm or acceleration 10 g;

3 directions; total 6 hours (3

× 2 hours)

no damage

∆R/R max.: ±0.5% + 0.05 Ω

4.20

bump

4000

±10 bumps; 390 m/s2

no damage

∆R/R max.: ±0.5% + 0.05 Ω

R = 6 mm

load

MBB179

AC01 датащи(PDF) 23 Page - NXP Semiconductors

AC01 датащи(HTML) 23 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

датащи скачать

ссылки URL